I thought I'd start with a simple description of what I want to build.
Start with 3 wheels, 3 drive motors, 3 turning motors. Place them in a roughly hexagonally shaped structure with the edges curved in an s. These "faces" would work to slide and lock together, allowing multiple robots ultimately to move around connected.
Drive motors would be attached to each "leg" to allow it 360 degrees of freedom. Slip/slide tines/rings could provide the conductive path to power the motors. Turning motors would sit in the main body and rotate the legs by chain or belt. Initial thoughts on locking mechanisms include automotive hood, trunk or door latch.
Major areas of concern include:
Comms mechanism: How to get the commands to the unit, and how to communicate these out to the necessary parts and pieces.
Drive: Translating drive commands to a coherent, cohesive set of commands to send to the motor controllers. This is a non-trivial challenge.
Sensors/input: This will become more important when we have more than one and/or have some sort of autonomous control, but knowing how far each wheel has traveled and exactly which direction it's pointing will be necessary for coordinating the forward movement.
Sensor/inputs I can think of currently:
- Compass (We can do a LOT with this) (absolute direction?)
- Accelerometer
- GPS
- Rough encoder for wheel rotation(?) - more connectivity, difficult/expensive pathways
- encoder for wheel direction.
- Camera
If we use a $100-200 eeepc as the brain, it has a built in camera, ethernet, wifi, bluetooth, USB, keyboard, screen, etc.
Makes me want to hack together multipoint bluetooth for the encoders on the wheels.
No comments:
Post a Comment