Monday, January 18, 2010
Something is obvious
The control system must use polar coordinates. All wheels will only go one direction that way. Hm. Seems right.
Sunday, January 17, 2010
Moving forwards
Progress was slow today. Had issues with glue and wheels. Thinking about picking up and raiding an RC car for parts. I'll need a controller, but twice the motors, so not sure if that'll work. Have a weird mental block on hooking up the controller to the motor and stuff. Slowly working through it.
Saturday, January 16, 2010
Real progress today
I realized that the easy hands-off stuff is waiting on hands on stuff to move forward. It's easy to say you'll make a little progress every day when there are little things to do. I have big things that need to be done, and a lot to be figured out, so the little incremental daily bits aren't working.
Today I made some real progress towards robots. I have the basic structure put together now. I'm realizing I need different wheels, as the ones I have are not going to work. I'll also need to figure out how to mount the motors. This isn't the biggest challenge for me right now.
What I need to figure out next is figuring out how to drive the thing.
I have:
Motors, TReX Jr. Motor controllers, a mega arduino. Nothing is connected to anything else. I'm a little overwhelmed at the moment as to where to begin. I guess I can start with the motor controllers. I suppose moving on to the Mega Arduino would be best once I can figure out what it needs to output. Then I guess I can make a little sequence for it to get the motors to move in a certain sync relationship.
After I get new wheels, I need to figure out how to pass signals down to the motor. Then once I have the arduino generating patterns, I can call it done for the weekend.
Next up after all this is done?
Coming up with ways to map intended motions to motor instructions.
Finding some way to pass this guy instructions for things.
First thing, I need to figure out how to hoook u
Today I made some real progress towards robots. I have the basic structure put together now. I'm realizing I need different wheels, as the ones I have are not going to work. I'll also need to figure out how to mount the motors. This isn't the biggest challenge for me right now.
What I need to figure out next is figuring out how to drive the thing.
I have:
Motors, TReX Jr. Motor controllers, a mega arduino. Nothing is connected to anything else. I'm a little overwhelmed at the moment as to where to begin. I guess I can start with the motor controllers. I suppose moving on to the Mega Arduino would be best once I can figure out what it needs to output. Then I guess I can make a little sequence for it to get the motors to move in a certain sync relationship.
After I get new wheels, I need to figure out how to pass signals down to the motor. Then once I have the arduino generating patterns, I can call it done for the weekend.
Next up after all this is done?
Coming up with ways to map intended motions to motor instructions.
Finding some way to pass this guy instructions for things.
First thing, I need to figure out how to hoook u
Tuesday, January 12, 2010
Not doing so well...
Bit of job-drama yesterday enough to occupy thoughts on non-robot things. By the end of the week, I think things will change. In the mean time, not sure how much I will be able to focus here.
Monday, January 11, 2010
Frustrated
Slept most of the day today, so made no progress. Being sickly right now does not help forward motion at all. Need to do more tomorrow.
Saturday, January 9, 2010
Occupied?
I studied for and passed the amateur radio technician license today. I haven't had my mind on much with this except for a few things:
- I need a drawing of this before I get too much more into it.
This poses a conundrum as I can't draw and I'm not familiar with any CAD program. I'll try to put something together in Blender tonight/tomorrow and see what comes of it. I'm told Blender has amazing properties. We'll see.
- What kind of communications am I going to need?
I'd toyed with the idea of creating a communications protocol for these guys. That might be next year's project, though.
- I need a drawing of this before I get too much more into it.
This poses a conundrum as I can't draw and I'm not familiar with any CAD program. I'll try to put something together in Blender tonight/tomorrow and see what comes of it. I'm told Blender has amazing properties. We'll see.
- What kind of communications am I going to need?
I'd toyed with the idea of creating a communications protocol for these guys. That might be next year's project, though.
Friday, January 8, 2010
Thoughts before breakfast
So I started out thinking this morning about the rotary electrical unions. In thinking about it, I feel it'd be a bad idea to buy these. They're extremely hard to find and very expensive when you do. Most of them are made for high power environments (such as generators) so are way bigger than we'd need. I spent a bit of time talking to Carl Pisaturo about his rotary unions at Dorkbot a while back. Although his are very pretty, I think we could come up with something a lot less polished that would do the job slightly more off the shelf, but following about the same concept of rings and combs. These could be constructed as "caps" that go on the tops of each of the legs. I do think more thinking is required in the comb part. I'm not convinced of Carl's use of stainless steel as a conductor for the comb.
But a new problem struck me as I was mulling over the legs. How to stabilise them, attach the drive motors to the wheel and still have full rotary motion. It seems that for greatest stability, the motor should be as close to the wheel as possible, allowing the shaft to be stabilised and supported at multiple points along the greatest length. This makes good sense, but sticks the motor way down in the dust and mud. Will this be a problem? I'm hoping that for the automotive-style motors I'd consider, the answer is no.
But a new problem struck me as I was mulling over the legs. How to stabilise them, attach the drive motors to the wheel and still have full rotary motion. It seems that for greatest stability, the motor should be as close to the wheel as possible, allowing the shaft to be stabilised and supported at multiple points along the greatest length. This makes good sense, but sticks the motor way down in the dust and mud. Will this be a problem? I'm hoping that for the automotive-style motors I'd consider, the answer is no.
Subscribe to:
Posts (Atom)